Secures a working site
A solid, closed line with no external footholds and no gaps at ground level to reach through.

Construction site screening
Solid site hoarding installed to secure, screen and present active construction sites, with vehicle and pedestrian access built into the line.
Commercial fencing installation across Essex and surrounding areas
Typical applications
Construction sites, refurbishments, phased works, public frontages
Construction
Plywood-faced hoarding on braced timber framing
Finish options
Painted, or prepared for contractor and client graphics
Access arrangements
Vehicle gates, pedestrian gates and lockable closures
Overview
Hoarding does three jobs at once. It keeps the public out of a working site, it screens activity, dust and stored materials from view, and it presents the project to everyone who walks past. On a public-facing scheme the hoarding is the most visible thing about the job for months.
The construction has to reflect that. Sheet material is fixed to a braced timber frame on posts set for the height and exposure, with framing on the site side, no climbable rails outside, and a ground line closed off so there is no gap to reach or crawl through. Wind loading on a solid run is significant, so bracing and post foundations are sized rather than assumed.
Access is designed with the hoarding, not cut into it later. Vehicle gates need to open clear of the footway, pedestrian gates need to be usable and lockable, and both need posts and framing capable of taking daily use by a busy site. Where the hoarding sits on a public route, sightlines at the gate matter for pedestrian safety.
We also plan for the fact that hoarding is temporary. Sections are built so they can be adapted as the job phases change, and removed cleanly at completion with the ground made good. Where the client wants graphics or painted panels, faces are prepared for that from the start.
Applications
Hoarding is specified where a working site meets the public, or where activity needs to be screened for the duration of the works.
Why it works
A solid, closed line with no external footholds and no gaps at ground level to reach through.
Full-height sheeting keeps works, plant and stored materials out of public view.
Braced framing and sized post foundations, because a solid run carries far more load than open fencing.
Vehicle and pedestrian gates set out so they work with the footway, traffic and daily site movements.
Specification
Height, framing, gate positions and finish are confirmed following a site survey and a look at how the site will operate.
Final specification is confirmed following a site survey.
Our process
We inspect the boundary, access, ground conditions and operational requirements.
We recommend a suitable fencing system, height, finish and gate configuration.
The work is coordinated to minimise disruption and maintain safe site access.
The fencing and gates are installed carefully, checked and left with a clean, consistent finish.
Specification enquiry
Hoarding is straightforward to get wrong: too light for the wind load, gates in the wrong place, or a ground line left open. Pro Fencing can assess the site boundary, footway and access needs and set out a hoarding line, gate arrangement, height and finish that works for the full duration of the project.
Why Pro Fencing
We assess how the boundary needs to perform before recommending a fencing system, finish or gate configuration.
Fencing for industrial, educational, commercial and public environments.
Recommendations based on the boundary, ground, access and security requirement.
Installation coordinated to maintain safe access and minimise disruption.
A defined route from site survey and specification through to installation.
Coverage
Pro Fencing supplies and installs commercial fencing systems throughout Essex. We work with businesses, schools, contractors, sports facilities and public-sector organisations, providing site-specific fencing and gate solutions for new installations, upgrades and boundary replacements.
FAQs
It is usually set by what has to be screened and by any requirement from the client, principal contractor or local authority. Public frontages generally need full-height solid hoarding; a rear compound may need less. We agree the height against those requirements and against the wind loading the run will carry.
Yes. Faces can be painted in agreed colours and prepared so printed graphics, project boards or signage can be applied. It is worth deciding this before installation so the panel layout, joints and framing positions suit the artwork rather than cutting across it.
A solid run behaves like a sail, so bracing and foundations do the work. Framing is braced back on the site side, posts are sized to the height and set in concrete or into appropriate supports, and returns and corners are used to stiffen long runs. This is the part most commonly under-specified.
Yes, and on most larger sites that is how it works. Sections are built, moved and adapted as the works advance, with each stage leaving a secure closed line at the end of the day. Phasing is worth planning early because it affects gate positions and how much material can be reused.
Yes. Removal, making good the ground and clearing the material can be included, which is usually simpler than arranging it separately at completion. Where the programme has a tight handover date, we agree the removal window in advance so it does not sit on the critical path.
We install site hoarding throughout Essex and the surrounding areas, including Basildon, Brentwood, Chelmsford, Wickford, Rayleigh, Grays, Thurrock, Southend-on-Sea, Romford, Harlow and Colchester. We also work outside the county on larger construction schemes.
Get started
Talk to Pro Fencing about your site, security requirements and installation timeframe. We can assess the boundary and recommend a suitable solution.